41
D-Link DCS-6314 User Manual
Section 3: Configuration
Enable PPPoE:
User Name /
Password:
HTTP Port:
Access Name for
Streams 1- 2:
HTTPS Port:
Authentication:
RTSP Port:
Enable CoS:
Enable QoS:
Click
Enable
if your network uses PPPoE.
Enter the
User Name
and
Password
for your PPPoE
account. Re-enter your password in the
Confirm
Password
field. You must obtain this information
from your ISP.
The default
HTTP port
number is 80.
The default name is video#.mjpg, where # is the
number of the stream.
You may use a PC with a secure browser to connect
to the
HTTPS port
of the camera. The default port
number is 443.
Choose to
Enable
or
Disable
the RTSP digest
encryption. Digest encryption uses MD5 hashes.
The port number that you use for RTSP streaming
to mobile devices, such as mobile phones or PDAs.
The default port number is 554. You may specify
the address of a particular stream. For instance,
live1.sdp can be accessed at rtsp://x.x.x.x/video1.
sdp where the x.x.x.x represents the ip address of
your camera.
Enabling the Class of Service setting implements a
best-effort policy of traffic control without making
any bandwidth reservations. Select a number to
specify traffic priority.
Enabling the QoS setting establishes a reservation
control mechanism for establishing traffic priority.
This will ensure a consistent Quality of Service
during busy periods. If the Network Camera is
connected to a router that itself implements QoS,
the router's settings will override the QoS settings
of the camera.
