DAP-1610
AC1200 Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
Log
On the
System / Log
page, you can set the system log options and configure sending the system
log to a remote host.
Figure 60. The
System / Log
page. The
Settings
tab.
To enable logging of the system events, go to the
Settings
tab and move the
Enable
switch to the
right. Then specify the needed parameters.
Parameter
Description
Type
Select a type of logging from the drop-down list.
•
Local
: the system log is stored in the extender's memory.
When this value is selected, the
Server
and
Port
fields are
not displayed.
•
Remote
: the system log is sent to the remote host specified in
the
Server
field.
•
Local and remote
: the system log is stored in the extender's
memory and sent to the remote host specified in the
Server
field.
Level
Select a type of messages and alerts/notifications to be logged.
Server
The IP or URL address of the host from the local or global network,
to which the system log will be sent.
Port
A port of the host specified in the
Server
field. By default, the value
514
is specified.
After specifying the needed parameters, click the
APPLY
button.
Page
79
of 91
