DAP-1610
AC1200 Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
In the
Dynamic IP Addresses
section, you can configure the built-in DHCP server of the
extender.
Figure 34. Configuring the local interface. The
IPv4
tab. The
Dynamic IP Addresses
section.
Parameter
Description
Dynamic IP Addresses
Mode of dynamic IP
address assignment
An operating mode of the extender's DHCP server.
Disable
: the extender's DHCP server is disabled, clients' IP
addresses are assigned manually.
DHCP server
: the extender assigns IP addresses to clients
automatically in accordance with the specified parameters. When
this value is selected, the
Start IP
,
End IP
,
Lease time
fields and
the
DNS relay
switch are displayed on the tab.
Start IP
The start IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
End IP
The end IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
Lease time
The lifetime of IP addresses leased by the DHCP server. At the end
of this period the leased IP address is revoked and can be distributed
to another device, unless the previous device has confirmed the need
to keep the address.
DNS relay
Move the switch to the right so that the devices connected to the
extender obtain the address of the extender as the DNS server
address.
Move the switch to the left so that the devices connected to the
extender obtain the address transmitted by the ISP or specified on
the
Advanced / DNS
page as the DNS server address.
When all needed settings are configured, click the
APPLY
button.
Page
39
of 91
