DAP-1610
AC1200 Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
Configuring Wireless Network
This configuration step is available for the
Access point
and
Repeater
modes.
1. On the
Wireless Network 2.4 GHz
page, in the
Network name
field, specify your own
name for the wireless network in the 2.4GHz band
or leave the value suggested by the
extender.
2. In the
Password
field, specify your own password for access to the wireless network or
leave the value suggested by the extender (WPS PIN of the device, see the barcode label).
3. You can restore the parameters of the wireless network specified before resetting to factory
defaults. To do this, click the
RESTORE
button.
Figure 27. The page for configuring the wireless network.
4. Click the
NEXT
button to continue or click the
BACK
button to specify other settings.
5. On the
Wireless Network 5 GHz
page, specify needed settings for the wireless network
in the 5GHz band and click the
NEXT
button.
Page
32
of 91
