DAP-1610
AC1200 Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
In the
Static IP Addresses
section, you can specify MAC address and IP address pairs (set a
fixed IPv4 address in the local area network for a device with a certain MAC address).
Figure 35. The section for creating MAC-IP pairs.
To create a MAC-IP pair, click the
ADD
button. In the opened window, in the
IP address
field,
enter an IPv4 address which will be assigned to the device from the LAN, then in the
MAC
address
field, enter the MAC address of this device. In the
Hostname
field, specify a network
name of the device for easier identification (
optional
). Click the
APPLY
button.
In order to view MAC addresses of the devices connected to the extender at the moment, click the
CLIENTS LIST
button. In the opened window, select the needed device and click the
OK
button.
To view the latest list of the connected devices, click the
REFRESH
button.
To edit the settings for the existing MAC-IP pair, left-click the relevant line in the table. In the
opened window, change the needed parameters and click the
APPLY
button.
To remove a MAC-IP pair, select the checkbox located to the left of the relevant line in the table
and click the
DELETE
button. Then click the
APPLY
button. Also you can remove a MAC-IP pair
in the editing window.
Page
40
of 91
