manualshive.com logo in svg

D-Link D DXS-3227 DXS-3227, Руководство по установке в сети

Поделиться
Скачать
D-Link D DXS-3227 DXS-3227 Скачать руководство пользователя страница 67

 D-Link DXS-3250/DXS-3227P/DXS-3227 User Guide

 

 Page 

67

  

–

Fault

 — Indicates that the device has detected a fault on the powered device. For example, the powered 

device memory could not be read.

•

Priority Level

 — Determines the port priority if the power supply is low. The port power priority is used if the 

power supply is low. The field default is low. For example, if the power supply is running at 99% usage, and 
port 1 is prioritized as high, but port 3 is prioritized as low, port 1 is prioritized to receives power, and port 3 
may be denied power. The possible field values are: 

–

Low

 — Defines the PoE priority level as low. This is the default level.

–

High

 — Defines the PoE priority level as high. 

–

Critical

 — Defines the PoE priority level as Critical. This is the highest PoE priority level. 

•

Power Consumption

 — Indicates the amount of power assigned to the powered device connected to the 

selected interface. Devices are classified by the powered device, and the devices uses the classification infor-
mation. The field values are represented in Watts. The possible field values are: 

–

0.44 – 12.95

 — Indicates that the port is assigned a power consumption level of .44 to 12.95 Watts.

–

0.44 – 3.8

 — Indicates that the port is assigned a power consumption level of .44 to 3.8 Watts. 

–

3.84 – 6.49

 — Indicates that the port is assigned a power consumption level of 3.84 to 6.49 Watts.

–

6.49 – 12.95

 — Indicates that the port is assigned a power consumption level of 6.49 to 12.95 Watts.

•

Powered Device

 — Provides a user-defined powered device description. The field can contain up to 24 char-

acters.

2.

Click 

. The PoE interface is defined, and the device is updated.

To modify PoE interfaces:

1.

Click the 

System 

>

 Power over Ethernet > Interface 

tab. The 

Power Over Ethernet Interface Page

 opens. 

2.

Click . 

The 

PoE Interface Settings Page

 opens:

Figure 27: PoE Interface Settings Page

In addition to the fields in the 

Power Over Ethernet Interface Page, 

the

 PoE Interface Settings Page

 contains the 

following additional fields: 

Содержание D DXS-3227 DXS-3227
























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды