Section 3 – Configuration
D-Link DSL-2542B User Manual
54
IP Filtering – Incoming
The Inbound Filter allows you to create a filter rule to allow incoming IP
traffic by specifying a filter name and at least one condition on this
window. All of the specified conditions in this filter rule must be satisfied
for the rule to take effect. By default, all incoming IP traffic from the
Internet is blocked when the firewall is enabled.
If you are setting up the incoming IP filtering, click the
Add
button.
Enter the information in the section. Explanations of parameters are
described below. Click the
Save/Apply
button to add the entry in the
Active Inbound IP Filtering table.
