DSA-3200 Wireless Service Gateway User Manual
7
2.3 Panel Function Descriptions
Device LED Indicators
Power LED:
Will illuminate when the Power Supply is connected to the DSA-3200 and an
appropriate AC power outlet (110VAC). If the LED does not illuminate when the device is plugged
in, try a known good power outlet. If the LED still does not light with a known good outlet, please
contact Technical Support for assistance.
Status LED:
A solid light indicates a functional, ready state of operation. This LED will blink
during a device restart or reconfigure, then illuminate solid to indicate proper operation. If this
LED continuously flashes or does not illuminate when the device is powered on, please contact
Technical Support for assistance.
Public WLAN LED:
This indicator will flash to indicate proper RF operation of the internal AP.
The LED will blink rapidly with activity.
WAN LED:
A solid light indicates a valid Ethernet Link to the WAN modem/switch. LEDs will blink
to indicate WAN activity. No light indicates a no-link state (no cable or bad cable).
Private/Public LAN LEDs:
A solid light indicates a valid Ethernet Link to a hub/switch or PC.
LEDs will blink to indicate activity. No light indicates a no-link state (no cable or bad cable).
WAN LED –
A valid Ethernet Link will
produce a solid glow. The
LED will blink with activity.
Power LED –
Solid glow when
the DSA-3200 is
powered on.
Private LAN LEDs –
A valid Ethernet Link
will produce a solid
glow. The LEDs will
blink with activity.
Status LED –
Solid glow when
device is ready. Will
flash during device
restart or reconfigure.
Public LAN LEDs –
A valid Ethernet Link
will produce a solid
glow. The LEDs will
blink with activity.
Public WLAN LED –
Will flash to indicate
proper RF operation
and blink with activity.