0110562R4 Page 2 of 8
1. Assemble Shelf
A. Align and attach the shelf to the cord wrap bracket with (4) 8-32 x 3/8” PHM
screws as shown in
Figure 1
.
B. Using the narrow slots as guides, apply (6) 3” x 2” adhesive Velcro
®
pads (hook side) to the top of the shelf as shown.
cord wrap
bracket
8-32 x 3/8” PHMS
(4) req’d
Figure 1
shelf
adhesive Velcro
®
pads
(6 on top of shelf, one
under shelf)
narrow slot
Note: If you have the shelf
only (no hubs) skip to step 4.
2. Install USB Hubs
(hubs only included with #55444)
A. Apply a 3” x 2” Velcro
®
pad (loop side) to the bottom of each USB hub.
B. Attach the 6 hubs to the top of the shelf.
Figure 2
.
C. Attach the feeder (Hub #7) to the bottom of the shelf 90° to the other hubs as shown.
Note: The single feeder hub under the shelf distributes the data stream to the other
6 hubs.
D. Power cords and USB cables can be secured to the shelf with the included zip ties, and
cord wrap bracket.
E. See the hub installation guide included with the hubs for further operational, connection,
and setup info.
adhesive Velcro
®
pad
shelf
Figure 2
Hub #3
Hub #2
Hub #1
Hub #6
Hub #5
Hub #4
“Feeder“ USB Hub #7
mounted at 90° angle
under shelf
