0110562R4 Page 6 of 8
5. Route Cords
A. On the instructor-side of the cart (outlet-side) route the USB cord from the feeder hub under
the shelf up the inside wall of the cart to the worksurface.
Figure 5A
. The cord can be
secured using the plastic cord clip inside the cart.
B. Route the power cords from all USB hubs down the inside wall of the cart.
Figure 5C
. The
cords can be secured using the plastic cord clips.
C. Mount the existing 7-outlet auxiliary and included 7-outlet power strips to the bottom of
the cart with Velcro
®
pads and switch off.
D. Plug the USB hub power adapters into both power strips. The adapters will need to
be staggered using every other outlet.
Figure 5D, 5E
.
Figure 5
USB cord from
feeder hub
7-outlet power strip (included with cart) attached
to base panel w/ Velcro
®
(shown with USB Hub
power adapters plugged in)
USB hubs
plastic cord clip
Figure 5A
Figure 5B
Figure 5C
Figure 5D
“Feeder”
USB Hub
outlets for tablet
chargers
7-outlet power strip (included in 55443, 55444)
attached to base panel with Velcro
®
(shown
with USB Hub power adapters plugged in)
Figure 5E
outlets for tablet
chargers
to wall
outlet
to wall
outlets
