19
To activate and set this mode go to the ‘KH Status page as described above under the heading
‘ACTIVATING AND DEACTIVATING AUTOMATIC KH DOSING’, then select ‘Add KH Settings’. The next
screen will show different device options for adding the KH buffer, choose ‘Use “KH Carer” to add’.
This will take you to the settings page for dosing using the KH Manager, at the top ‘Auto Add’ or
‘Custom Plans’ will be displayed. If ‘Auto Add’ is shown, tap on the blue downwards facing arrow at
the end of the heading and select ‘Custom Plans’ from the pop-up that appears on the bottom of the
screen.
Setting the plan:
Setting of the main dosing plan is similar to the programming used on the D-D
dosing pumps.
Start by adding a group, this lets you name the group of programs and the time period that
the group is active. Tap on ‘+ New Group’ to start, enter a name by selecting the white box
labelled ‘Name’, enter the chosen group name followed by ‘Done’. After this tap on ‘Time’
and use the scroll wheel that appears to set a start and end time for the program group, to
confirm tap ‘Done’. When completed select ‘Save’ in the top right corner. The app will return
to the custom plans page.
A tile showing the plan group you have just set up will be displayed on the screen, tap on the
blue arrow in the bottom right corner of your plan group tile to expand it and show the
options ‘Add a Plan’ and ‘Quick Add’.
Add a plan:
This option will allow you to add single plans at a time without adjusting others
that are already set. Tap on the ‘Add a Plan’ tab and then enter a time for the plan to start
by selecting ‘Start Time’, use the scroll wheel to set the time and then save by selecting
‘Done’, next tap on ‘Add’ to enter the amount of solution you would like to add at the time
you have just set, tap on the white box at the top of the page that appears, enter the volume
in ml, select done and then save in the top right corner. Check the time and dosing volume
are correct, then save in the top right corner. The plan you have created will now show in
the group, these steps can be repeated to add more plans if needed.
Quick add:
If you are adding multiple plans this is the quickest option, please note using this
will overwrite any existing plans in the group. Tap on the ‘Quick Add’ tab to begin, a prompt
will appear on the screen to warn that proceeding will replace any existing plans, choose
‘Ok’ to continue or ‘No longer Prompt’ to dismiss the warning permanently.
o
Tap on ‘Add times’ and then set the number of doses you would like to have in the
group on the scroll wheel that appears at the bottom of the screen, select done to
set.
o
To enter the total amount of KH buffer solution you would like to add select ‘Total
Add’, tap on the white box at the top of the page that appears, enter the volume in
ml, select done and then save in the top right corner.
o
Set the anti-chemical interference, if needed, by selecting the heading ‘Anti-
chemical Interference’ and choosing a time on the scroll wheel that appears at the
bottom of the screen, then select done to set.
o
A plan preview is available by tapping on the toggle switch to the right of the
heading ‘Plan Preview’.
o
When the settings are complete tap ‘Save’ in the top right corner to save and return
to the custom plans page.
Содержание KH Manager
Страница 1: ...KH MANAGER INSTRUCTION MANUAL V1 0...