28
222-914-0009-EN5
Step 3: Disconnect the black connector from the board by pressing the latch. Disconnect the audio cable
then remove the electronic board:
Step 4: Connect the new board then proceed with the reassembly (steps 3 to 1).
11.2
How to replace the HaptiSync Processor
Step 1: Disconnect the audio cable and board connector (see section 11.1).
Step 2: Disconnect the USB microphone cable underneath the seat then remove the four (4) screws holding
the HaptiSync Processor using a 10mm socket:
Press the latch
Audio cable
Microphone
USB Cable
