29
222-914-0009-EN5
Step 3: Remove the Haptic Processor with its cable harness then install the new one:
•
Pass the control cable harness of the new HaptiSync Processor through the armrest hole.
•
Screw the four (4) screws to attach the Haptic Processor using a 10mm socket.
•
Connect the USB microphone cable.
•
Reconnect the seat controller PCB connectors and put back the cover (see section 11.1).
11.3
How to replace the D-BOX Haptic Module
Step 1: Using a 13mm socket, remove the three screws that hold the seat cushion in place underneath the seat:
