22
Manual del Usuario /
event series
/
User’s Manual
Groups of four or six units are easy to transport by
truck as we will see in this manual.
Once the packaging is removed, you can see four
security locking pins on the rear enclosure´s rigging
system. These pins are going to be used to stack the
cabinets; always use the pins of the unit to attach the
one that is going to be located above it. The rigging
system of the EVENT-26A employs a 3 point
attaching system. Use two of the pins in the front left
and right structures and the other two in the rear one.
The PL-EV26S includes 3 locking pins to stack the
first unit.
Warning: For transport, introduce the pin in
hole 1º at “Rear Link"in the first EVENT-26A
4 or 6 units mounting on a PL-EV26S flatbed dolly
Use 3 pins (PIN-6)
of the P L-E V26S
2 at the front, one on
each side
"Rear Link"
at 1º
Fig.1
2
4
6
0
1
3
5
7
9
10
8
10+1
PIN
HOLDER
Use 4 pins (PIN-6)
of the bottom EVENT-26A
2 at the front and 2 at the rear
link
Fig.2
The next figure shows the detail
of the label located at the rear
rigging structure of the EVENT-
26A.
Splay angles vary form 0º to 10º in
steps of 1º.
To secure (lock the movement)
the systems when flying or
stacking them, two pins are
needed at the rear. One must be
introduced in the “splay” angle
h o l e , a n d t h e o t h e r i n t h e
“splay+1º” hole.
Fig.3
Fig.4
W h e n t r a n s p o r t i n g t h e s y s t e m s i s
recommended to insert one of the pins in the
10º splay angle at the rear. By doing this the
cabinets wouldn´t be able to get separted from
the rear.
set splay
