D.A.S. EVENT SERIES, Руководство пользователя

Страница: 16 / 33

INPUT 1
OUTPUT 1
INPUT 2
OUTPUT 2
www.dasaudio.com
AUDIO MANAGEMENT
PUSH FOR DSP
VOLUME
Made in Spain
AC INPUT
115/230 V~ 50/60Hz
325W T5 A L 250V FUSE
FOR CONTINUED PROTECTION
AGAINST RISK OF FIRE REPLACE
ONLY WITH THE SAME TYPE
Model: EVENT-115A
CAUTION
DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DAS Audio Group, S.L. (Valencia)
MAX. 10@230V / 4@115V
UNITS EVENT-115A
AC OUTPUT
EVENT-115A amplifier
1) INPUT :
1/4” Jack+XLR c ombined socket-type input signal
connector. This is a balanced connector just like the OUTPUT
connector with the following pin assignments
:
1 or S =GND (ground) 2 or T =(+) Non inverted input 3
or R =(-) Inverted input
2) OUTPUT :
A and B, XLR-type output signal connectors for connecting
several units together and sending them all the same input
signal (THRU).
3) DISPLAY:
LIMIT / INPUT CLIP :
The signal´s input level can be monitored in the LCD
screen on the left meters, channels 1 and 2. When the signal
level is too high the Display will show “INPUT CLIP”. Please
reduce the level accordingly.
The output level with respect to the Limiter threshold can
be monitored on the right meter. When the value reaches the
limiter threshold the Display will show “LIMIT” (depending on
the configuration mode the Display can be programmed to
blink when the system is limiting).
SIGNAL :
The left meter indicates the presence of signal.
ON :
The Display will be illuminated when the system is on.
The background light of the display can be switched off
permanently by selecting in the options / Dimming menu, the
“dark” preset. This option will make the Display blink (on and
off) when the system reaches its limit. This option maybe
useful in theaters or similar applications in order to reduce the
visual contamination.
4) ENCODER (DAScontrol) :
Use the rotary encoder to navigate for preset selection (Low
Pass Filter, deep-loud etc) and options (reset, dimming etc).
5) AC INPUT :
PowerCon NAC3FCA mains connector (inserted, rotated
and locked for ON). Only use this equipment with an
appropriate mains cord.
6) AC OUTPUT :
PowerCon NAC3FCB connector for AC loop thru (see
unit’s label)). Only use this equipment with an appropriate
mains cord.
7) POWER :
‘Mains power ON/OFF switch. To disconnect the device
the user should use the mains plug.
1 2
loud Top
0.0m
O
0 dB
16 Manual del Usuario /
event series
/ User’s Manual
3
4
1
2
5
6
7
line array