D.A.S. DXi Series, Руководство пользователя

Страница: 42 / 56

42
Manual del Usuario
/ DXI series /
User’s Manual
RESETTING BACK TO DEFAULTS AND CLEARING SECURITY
If you need to quickly clear all current settings and memories, there are a variety of setup control
codes that can do this for you.
Default Settings
Your amplifier will start-up as a “four analogue inputs to four output system”, with no EQ or limiting
(apart from self-protective limiters) in place. The aux outputs will “mirror” the analogue inputs (and so
initially act just like “link” outputs, again with no EQ or limiting in place).
Entering Start-up Control Codes
Turn the amplifier on with the BACK and ENTER keys held. The display will show:
Enter Setup Code:
[ ]
Use the EDIT and MUTE keys to represent the characters A, B, C D for EDITs and 1, 2, 3, 4 for
MUTEs.
Type in one of the following codes to initiate a setup function:
D4B13D – clear all user memories and reset to defaults, keeping security and factory alignment
settings
A2341B – clear current settings to default (leaves memories, alignments and security)
AA2121 – clear security via the XTA/MC2 supplied crack code
Clearing Security – Forgotten Unlock Code
Note that if you see the message “Parameters Locked!” during editing, or parameters can be viewed
but not adjusted, then this is due to preset data locking or hiding and is specific to the currently running
preset – this is not device security, and we cannot override it – it is specified by the speaker
manufacturer.
If you have forgotten the pass-code and your amplifier is locked, you will need to contact us to
unlock it after performing the following procedure. There is no master unlock code for all amplifiers –
the code is generated based on an algorithm using amplifier internal settings for greater security.
Turn the amplifier on with the BACK and ENTER keys held. The display will show:
Enter Setup Code:
[ ]
Use the EDIT and MUTE keys to represent the characters A, B, C D for EDITs and 1, 2, 3, 4 for
MUTEs.
Type in AA2121.
The display will now show:
Make a note of the “Break Number” shown (64223 in this example) and contact us with this – we can
then supply the code to unlock your amplifier.
Do not enter any menus or make any further adjustments to the amplifier or this code may “roll over”
and you will need to go through this procedure again. Either switch the amplifier off or press QUIT to
exit without entering a code.
Resetting security leaves does not delete any settings – it just clears the locking passcode.
Enter XTA Supplied Code:
Break No.=64223 [ ]