D.A.S. DXi Series, Руководство пользователя

Страница: 19 / 56

19
Manual del Usuario
/ DXI series /
User’s Manual
DIRECTLY EDITING AUDIO PARAMETERS (cont'd)
Output High Pass Filter
Set the high pass filter frequency – a setting of “<10Hz” bypasses the filter. To change the filter slope
and type, press ENTER and then adjust with the encoder. Note that 48dB/Octave filters will only be
available if PEQ 6 & 7 are bypassed.
Parametric bands will remember their settings if bypassed and used in 48dB/Octave crossover filters
and these settings will be reinstated if a lower order filter type is subsequently chosen (24dB/Octave or
lower).
The message
Out 1 Output 1 HPF
25.8Hz Linkw - Riley 24dB
Bypass PEQ’s 6 & 7
To Access 48dB Slopes
will be shown if the bands aren't already in bypass (or set to 0dB).
Output Low Pass Filter
Set the low pass filter frequency – a setting of “>32kHz” bypasses the filter. To change the filter slope
and type, press ENTER and then adjust with the encoder. Note that 48dB/Octave filters will only be
available if PEQ 8 & 9 are bypassed.
Out 1 Output 1 LPF
9k70Hz Linkw - Riley 24dB
Parametric bands will remember their settings if bypassed and used in 48dB/Octave crossover filters
and these settings will be reinstated if a lower order filter type is subsequently chosen (24dB/Octave or
lower).
The message
Bypass PEQ’s 8 & 9
To Access 48dB Slopes
will be shown if the bands aren't already in bypass (or set to 0dB).