D.A.S. DXi Series, Руководство пользователя

Страница: 38 / 56

38
Manual del Usuario
/ DXI series /
User’s Manual
REMOTE CONTROL (cont'd)
Mode = USB Only: The USB socket on the front panel is active. Selecting this choice will then ask
for the following further information to be confirmed:
USB Speed: As the USB connection appears as a virtual COM port in remote software, it still
has an associated serial speed. Leave at the default of 57600. This is not the actual USB
serial data rate – it's the virtual COM port data rate!
RS485 Relay: Choose ON to relay all remote control data onto the RS485 network for
connection to further devices (other Delta DSP amplifiers or XTA processors)
RS485 Speed: Only shown if RS485 Relay = ON: set RS485 baud rate (recommended to use
57600)
Remote ID Number: Set a device ID (still required even on Ethernet connections). This must
be unique to the connected unit – setting the same ID on multiple units may cause comms
problems for all devices.