D.A.S. DX-100I, Руководство пользователя

Страница: 27 / 56

27
Manual del Usuario
/ DXI series /
User’s Manual
ADVANCED EDITING FEATURES (cont'd)
Changing Crossover Configuration
As the amplifier output's configuration setup is identical to the auxiliary output's configuration, this
section will just explain the former. The configuration of the amplifier outputs 1-4, and auxiliary outputs
1-4 have separate entries in the Configuration sub-menu, but operate identically. Once the input
sources and AES selections have been set up, the last part of the process is to determine what actual
routing configuration is required from the “outputs” of the four input processing channels.
This is the mix matrix. The mix matrix can function either in a “Boolean” operation mode, where input
signals still have the capability to be mixed together to feed an output channel's processing, but at fixed
standard levels, or as a fully variable mixer.
There is also a selection of useful templates if used in the “Boolean” mode, which will pre-configure
not only the routing, but also useful starting points for each outputs' crossover filters.
To change configuration, from the home screen, press MENU, choose the CONFIGURATION Sub-
Menu and press ENTER.
Use the encoder or BACK and NEXT keys to find the Output Routing option and press ENTER.
Use the encoder or BACK and NEXT keys to choose from the following routing options:
Full Matrix
This mode offers continuously variable send levels from the four input processing channels
and the adjustment of the levels is then through individual output editing as explained on page
22.
Free Assign
This mode allows the input sends to be selected as ON or OFF and intelligently adjusts the
send levels to maintain 0dB on the output – this is further explained on the next page.
1 x 4 WAY
All four outputs are fed from input processing channel A's output and assigned default
crossover points, which may then be adjusted if required.
2 x 2 WAY
Outputs 1 & 2 (or Aux 5 & 6) are fed from input processing channel A's output, and outputs 3
& 4 (or Aux 7 & 8) from channel B. Default crossover points are assigned.
4 x 1 WAY
Input processing channel A feeds output channel 1, B to 2, C to 3 and D to 4. Crossover
points are not assigned and will be set to full range – this can be changed manually if
required.
CONFIGURATION Sub -Menu
Output Routing
Output Routing
Routing = 2 x 2 WAY *