D.A.S. DX-100I, Руководство пользователя

Страница: 23 / 56

23
Manual del Usuario
/ DXI series /
User’s Manual
ADVANCED EDITING FEATURES
Overview
In addition to being able to control all the EQ and limiter functions via the front panel, it is also
possible to completely reconfigure the source selections and routing, turn on matrix mixing, and
configure ganging options to speed up editing.
The routing and ganging options are independent for the amplifier outputs and auxiliary outputs, but
source selection is global across the entire device.
Selecting Available Sources (Analogue, AES, Network Audio)
Your amplifier can source audio from
analogue, AES digital, or network locations
(DANTE).
Analogue and AES digital audio are standard,
and arranged so that AES digital audio can be
chosen in pairs of channels to replace either
analogue inputs A&B together or analogue
inputs C&D together, or all four channels.
Physical input of AES for channels A&B is
swapped to the input XLR for channel C and the
AES input for channels C&D is on the XLR
socket for channel D.
In this way, a pair of analogue inputs can
remain connected to channels A&B and a digital
stream of the same audio can be connected to
input C, with fallback from one to the other
possible without repatching.
With the DANTE card, four additional digital
sources will then be available.
In total, 8 sources can be made available at
any one time – four analogue and four digital.
This affects the choices that can be made for
routing to the inputs of the DSP channels.
The rules are as follows:
Analogue A and B is available at all times;
If AES A&B is selected, Analogue C cannot be used (shares XLR C);
If AES C&D is selected, Analogue D cannot be used (shares XLR D);
If AES A&B is chosen, Dante A&B cannot be used (shares SRC One);
If AES C&D is chosen, Dante C&D cannot be used (shares SRC Two);
Source selection is therefore affected by the selection of AES inputs, which then controls the choice
of input source selections on offer to any input processing channel. Switch any required AES sources
first, then select the required source combination.