5
EN / CZone® COI
– Combination Output Interface
1 GENERAL INFORMATION
USE OF THIS MANUAL
1.1
Copyright © 2016 BEP Marine. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the
contents in this document in any form without the prior written permission of BEP Marine is prohibited.
This manual
serves as a guideline for the safe and effective operation, maintenance and possible correction of minor malfunctions
of the Combination Output Interface, called COI further in this manual
.
This manual is valid for the following models:
Description
Part number
CZONE COI C/W CONNECTORS
80-911-0119-00
CZONE COI NO CONNECTORS
80-911-0120-00
It is obligatory that every person who works on or with the COI is completely familiar with the contents of this manual,
and that he/she carefully follows the instructions contained herein.
Installation of, and work on the COI, may be carried out only by qualified, authorized and trained personnel, consistent
with the locally applicable standards and taking into consideration the safety guidelines and measures (chapter 2 of
this manual). Please keep this manual in a secure place!
GUARANTEE SPECIFICATIONS
1.2
BEP Marine guarantees that this unit has been built according to the legally applicable standards and specifications.
Should work take place which is not in accordance with the guidelines, instructions and specifications contained in this
Installation manual, then damage may occur and/or the unit may not fulfil its specifications. All of these matters may
mean that the guarantee becomes invalid.
QUALITY
1.3
During their production and prior to their delivery, all of our units are extensivley tested and inspected. The standard
guarantee period is two years.
VALIDITY OF THIS MANUAL
1.4
All of the specifications, provisions and instructions contained in this manual apply solely to standard versions of the
Combined Output Interface
delivered by BEP Marine.
LIABILITY
1.5
BEP can accept no liability for:
Consequential damage due to use of the COI. Possible errors in the manuals and the results thereof
CAREFUL!
Never remove the identification label
Important technical information required for service and maintenance can be derived from the type number plate.
CHANGES TO THE COMBINED OUTPUT INTERFACE
1.6
Changes to the COI may be carried out only after obtaining the written permission of BEP.
