5
EN / CZone® Output Interface (MOI) User & Installation Manual
2 SAFETY AND INSTALLATION PRECAUTIONS
WARNINGS AND SYMBOLS
Safety instructions and warnings are marked in this manual by the following pictograms:
CAUTION
Special data, restrictions and rules with regard to preventing damage.
WARNING
A WARNING refers to possible injury to the user or significant material damage to the MOI if the user
does not (carefully) follow the procedures.
NOTE
A procedure, circumstance, etc, which deserves extra attention.
USE FOR INTENDED PURPOSE
1. The MOI is constructed as per the applicable safety-technical guidelines.
2. Use the MOI only:
•
In technically correct conditions
•
In a closed space, protected against rain, moisture, dust and condensation
•
Observing the instructions in the installation manual
WARNING
Never use the MOI in locations where there is danger of gas or dust explosion or potentially
flammable products!
3. Use of the MOI other than mentioned in point 2 is not considered to be consistent with the intended purpose.
BEP Marine is not liable for any damage resulting from the above.
ORGANIZATIONAL MEASURES
The user must always:
•
Have access to the user's manual and be familiar with the contents of this manual
MAINTENANCE AND REPAIR
•
Switch off supply to the system
•
Be sure that third parties cannot reverse the measures taken
•
If maintenance and repairs are required, only use original spare parts
GENERAL SAFETY AND INSTALLATION PRECAUTIONS
•
Connection and protection must be done in accordance with local standards
•
Do not work on the MOI or system if it is still connected to a power source. Only allow changes in your
electrical system to
be carried out by qualified electricians
•
Check the wiring at least once a year. Defects such as loose connections, burned cables, etc. must be
corrected immediately
