Product User’s Manual –
●
Figure below shows an example connection of SK40C to external device via UART
port. This example connection shows UART pins of SK40C (
) is
connected to UART pins of SKPS. Tx and Rx pin of SK40C should be cross
connected to Tx and Rx pin of
. In other words, Tx pin of SK40C should be
connected to Rx pin of SKPS, while Rx pin of SK40C should be connected to Tx pin
of SKPS. No extra component is necessary between these connections. For details
connection, please refer to sample schematic.
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved
20
