Product User’s Manual –
9. Select the given hex file “SK40C sample code (bootloader).hex” folder and click
open. Note that the original sample hex file, “SK40C sample code (bootloader).hex” is
for PIC18F4550.
10. Click “Program/Verify” to load hex file to your PIC and programming status will be
shown as below. Next, click “Reset Device” to run your program. LED1 and LED2
will blink like strobe on police car if “SK40C sample code (bootloader).hex” is
loaded. LEDs will stop blinking if either SW1 or SW2 button is being pressed.
11. User need to do some modification for other USB PIC. Change the device by clicking
Configuration>>Select Device as shown below.
Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved
33
