cytiva 18110760, Руководство по эксплуатации

Страница: 14 / 40

3 Product description
About this chapter
This chapter gives an overview of Adjustable Oligo Column.
Column design
The Adjustable Oligo Column has a simple design. It comprises a number of complete
units which are easily assembled together. The column tube is manufactured from
borosilicate glass. It is held in place between the top end-piece and bottom end-piece
by three support rods.
Note:
If the support rods between the two end-pieces have been removed and
refitted, they must be tightened with a torque key to 1.45 to 1.55 Nm for safe
operation.
The bottom end-piece contains the bottom filter unit in which a titanium filter and an
O-ring seals the unit against the column tube. The top end-piece houses the adapter.
The adapter contains a filter unit with a titanium filter. The unit is sealed against the
column with two O-rings. The adapter is held in place in the column by a screw-thread.
3 Product description
Adjustable Oligo Column Operating Instructions 28967444 AC 15