Module Documentation
FM4, S6E2DH/S6E2DF/S6E2D5/S6E2D3 Series, 32-Bit Microcontroller, Graphic Driver User Manual, Doc. No. 002-04387 Rev. *A
153
11.10.2.59 #define MML_ERR_GDC_PE_INVALID_CONTEXT MM_ERRCODE(0x2100D002)
Context object invalid
11.10.2.60 #define MML_ERR_GDC_PE_INVALID_DIMENSION MM_ERRCODE(0x2100D007)
Surface dimension is out of range
11.10.2.61 #define MML_ERR_GDC_PE_INVALID_FLOAT MM_ERRCODE(0x2100D023)
A float value exceeds the range supported by hardware
11.10.2.62 #define MML_ERR_GDC_PE_INVALID_MASK_PARAM MM_ERRCODE(0x2100D018)
Required parameter is not supported for mask
11.10.2.63 #define MML_ERR_GDC_PE_INVALID_MATRIX MM_ERRCODE(0x2100D006)
A matrix operation cannot be performed
11.10.2.64 #define MML_ERR_GDC_PE_INVALID_NO_ACTIVE_AREA
MM_ERRCODE(0x2100D014)
A blit operation was started but no active area source defined
11.10.2.65 #define MML_ERR_GDC_PE_INVALID_OPERATION MM_ERRCODE(0x2100D017)
The requested operation failed
11.10.2.66 #define MML_ERR_GDC_PE_INVALID_PARAMETER MM_ERRCODE(0x2100D016)
Invalid parameter was specified for an argument.
11.10.2.67 #define MML_ERR_GDC_PE_INVALID_RLD_REQUEST MM_ERRCODE(0x2100D011)
Required fetch unit does not support RLD
11.10.2.68 #define MML_ERR_GDC_PE_INVALID_ROP_MODE MM_ERRCODE(0x2100D012)
Not all surfaces are defined for the specified ROP mode
11.10.2.69 #define MML_ERR_GDC_PE_INVALID_SCALING MM_ERRCODE(0x2100D019)
The scale factor exceeds the hardware capabilities
11.10.2.70 #define MML_ERR_GDC_PE_INVALID_STORE_CLUT MM_ERRCODE(0x2100D021)
Store color lookup table not supported
11.10.2.71 #define MML_ERR_GDC_PE_INVALID_STORE_COMRESSION
MM_ERRCODE(0x2100D020)
Unsupported store compression type
11.10.2.72 #define MML_ERR_GDC_PE_INVALID_STRIDE MM_ERRCODE(0x2100D008)
Invalid value for Stride
11.10.2.73 #define MML_ERR_GDC_PE_INVALID_SURFACE_OBJECT
MM_ERRCODE(0x2100D004)
Surface object invalid