PSoC Analog Coprocessor Pioneer Kit Guide, Doc. # 002-11190 Rev. *B
7
Introduction
1.2
Board Details
As shown in
, the PSoC Analog Coprocessor Pioneer Kit features five onboard sensors.
The kit has two user buttons and an RGB LED. It also has a reset button, a power LED, and three
status LEDs. The kit can be powered from three power sources: USB, coin cell, or an external power
supply. Refer to
Power Supply System on page 40
for details. There is a power selection jumper
(J9), which allows you to select the kit operating voltage. The kit can operate at 1.8 V, 3.3 V, or 5 V
when powered from the USB connector or external power supply and will operate at 3.0 V when
powered from the coin cell. The USB connector is used as a power source and for programming and
debugging your application on the PSoC Analog Coprocessor.
Figure 1-3. PSoC Analog Coprocessor Pioneer Kit Top View
