PSoC Analog Coprocessor Pioneer Kit Guide, Doc. # 002-11190 Rev. *B
4
Safety Information
The CY8CKIT-048 PSoC
®
Analog Coprocessor Pioneer Kit is intended for use as a development
platform for hardware or software in a laboratory environment. The board is an open system design,
which does not include a shielded enclosure. For this reason, the board may cause interference with
other electrical or electronic devices in close proximity. In a domestic environment, this product may
cause radio interference. In such cases, the user may be required to take adequate preventive
measures. Also, this board should not be used near any medical equipment or RF devices.
Attaching additional wiring to this product or modifying the product operation from the factory default
may affect its performance and cause interference with other apparatus in the immediate vicinity. If
such interference is detected, suitable mitigating measures should be taken.
The PSoC Analog Coprocessor Pioneer Kit, as shipped from the factory, has been verified to meet
with the requirements of CE as a Class A product.
General Safety Instructions
ESD Protection
ESD can damage boards and associated components. Cypress recommends that the user perform
procedures only at an ESD workstation. If an ESD workstation is not available, use appropriate ESD
protection by wearing an antistatic wrist strap attached to a grounded metal object.
Handling Boards
PSoC Analog Coprocessor Pioneer Kit is sensitive to ESD. Hold the board only by its edges. After
removing the board from the box, place it on a grounded, static-free surface. Use a conductive foam
pad if available. Do not slide the board over any surface.
The PSoC Analog Coprocessor Pioneer Kit contains ESD-sensitive devices.
Electrostatic charges readily accumulate on the human body and any
equipment which can cause a discharge without detection. Permanent damage
may occur to devices subjected to high-energy discharges. Proper ESD
precautions are recommended to avoid performance degradation or loss of
functionality. Store unused PSoC Analog Coprocessor Pioneer Kit in the
protective shipping package.
End-of-Life/Product Recycling
The end-of-life cycle for this kit is five years from the date of manufacture mentioned
on the back of the box. Contact the nearest recycler to discard the kit.
