CY8CKIT-149 PSoC® 4100S Plus Prototyping Kit Guide, Doc. #: 002-20729 Rev. *E
6
Safety Information
General Safety Instructions
ESD Protection
ESD can damage boards and associated components. Cypress recommends that you perform
procedures only at an ESD workstation. If such a workstation is not available, use appropriate ESD
protection by wearing an anti-static wrist strap attached to the chassis ground (any unpainted metal
surface) on your board when handling parts.
Handling Boards
The CY8CKIT-149 PSoC 4100S Plus Prototyping Kit board is sensitive to ESD. Hold the board only
by its edges. After removing the board from its box, place it on a grounded, static-free surface. Use a
conductive foam pad if available. Do not slide board over any surface.
