Cypress EZ-PD CY4502, Руководство пользователя

Страница: 20 / 38

Kit Operation
CY4502 EZ-
PD™ CCG2 Development Kit Guide, Doc. No. 001-96601 Rev. *B
20
Table 3-3. Jumper Settings for CCG1 Host Demo Kit
Jumper Position Comments
J43 Open Board gets powered from USB 3.0 connector (J16) using jumper J47
J47 Closed Board gets powered from USB 3.0 connector (J16).
J35 Short 5
–6
Advertise Rp value of 10 k

for 3-A current on CC1.
J37 Short 5
–6
Advertise Rp value of 10 k

for 3-A current on CC2.
J40 Closed Enabling VCONN connectivity. Power measurement jumper at VCONN.
J44 Closed Enabling supply to CCG1. Power measurement jumper.
Note: The other jumpers on CCG1 Host Demo Kit, not listed in Table 3-3 , can be retained in any position for testing
CY4502 board. For more details on the CCG1 Host Demo Kit, refer CCG1 Host Demo Kit page.
4. Remove zero ohm resistors R1248, R1249 on the CCG1 Host Demo board.
5. Ensure that the CCG1 Client Demo board ( Figure 3-11 ) has the jumper settings listed in Table 3-4 .
Figure 3-11. CCG1 Client Demo board
Table 3-4. Jumper Settings for CCG1 Client Demo board
Jumper Position Comments
J11 Short 2
–4
Board gets powered from mini USB connector (J8).
J2 Short 5
–6
Advertise Rp value of 10 k

for 3-A current on CC1.
J3 Short 5
–6
Advertise Rp value of 10 k

for 3-A current on CC2.
J1 Closed Enabling VCONN connectivity. Power measurement jumper at VCONN.
J44 Closed Enabling supply to CCG1. Power measurement jumper.
Note: Other jumpers on CCG1 Client Demo board, not listed in Table 3-4, can be retained in any position for testing
CY4502 board. For more details on the CCG1 Client Demo board, refer CCG1 Demo Kit page.
6. Configure the CY4502 board for any of the applications discussed in sections 3.3 to 3.5 .
J11
– Short 2-4
J44
– Closed
J1
– Closed
J3
– Short 5-6
J2
– Short 5-6