Getting Started
CY4502 EZ-
PD™ CCG2 Development Kit Guide, Doc. No. 001-96601 Rev. *B
12
Figure 2-4. Cypress Update Manager
Notes:
You can launch the Update Manager from Windows > Start > All Programs > Cypress > Cypress Update
Manager.
After the installation is complete, the contents are available at the following location:
<Install Directory>\CY4502 CCG2 DVK\<version>
.
On Windows 32-bit platform, the default <Install Directory> is
C:\Program Files\Cypress
; on Windows 64-bit
platform, it is
C:\Program Files(x86)\Cypress
.
2.2 Install Hardware
There is no additional hardware installation required for this kit.
2.3 Install Software
When installing the CY4502 DVK, the installer checks if the required software is installed in the system. If the required
applications are not installed, then it installs them as prerequisites.
The following software programs are installed as part of CY4502 DVK installer:
USB-Serial SDK 1.0.3: Can also be downloaded from
http://www.cypress.com/?rID=83110
PSoC Programmer 3.22.3: Can also be downloaded from
2.4 Uninstall Software
The software can be uninstalled using one of the following methods:
Go to Start > All Programs > Cypress > Cypress Update Manager > Cypress Update Manager; select the Uninstall
button against the CY4502 CCG2 DVK.
Go to Start > Control Panel > Programs and Features; select the Uninstall/Change button against the CY4502
CCG2 DVK.
