46
CY8CKIT-029 PSoC® LCD Segment Drive Expansion Board Kit Guide, Doc. # 001-55415 Rev. *K
Code Examples
5.2.6.4
Sw_Sample_Clock
The clock component of PSoC Creator is used to sample the switch at the frequency of 500 Hz.
Figure 5-24. Clock Component Configuration: Configure Clock Tab
5.2.6.5
Clock_SW
This is a digital port component used to read the pin status. It is configured as "Input" port. The drive
mode of the pin is configured to Resistive Pull Up mode because the switch input is a Active High
input.
Figure 5-25. Switch Pin Configuration: General Tab
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from