18
CY8CKIT-029 PSoC® LCD Segment Drive Expansion Board Kit Guide, Doc. # 001-55415 Rev. *K
Kit Operation
3.3
Hardware Connection
3.3.1
Hardware Connection for CY8CKIT-001 DVK
Note:
The
Hardware Connection on page 18
and
Verify the Output on page 20
describe the
Example1_Battery_Metercode example. Please refer
Code Example 2:
LCD_Seg_Example2_StopWatch on page 37
for details on Example2_StopWatch code example.
Configure the DVK SW3 to 3.3 V. Connect the PSoC LCD segment drive board to port A of the DVK
as shown in
Figure 3-12
.
Figure 3-12. Board Connected to Port A
Connect the analog input from the potentiometer (VR slot in CY8CKIT-001 DVK) to P0_2 on the
DVK as shown in
Figure 3-13
.
Figure 3-13. VR Connected to P0_2 on CY8CKIT-001 DVK
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from