CYP IP-A750RX, Руководство по эксплуатации

Страница: 8 / 32

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
PWR
LINE
MIC
LINK MUTE
AUDIO
SELECT
CH - CH + MUTE
VOL.
- +
OPT.
2
1
3 4 6 5 7
1 PWR LED: This LED will illuminate to indicate the unit is on and
receiving power.
2 LINK LED:
While the receiver is attempting to establish a network
connection the LINK LED will flash. When the receiver has established
a stable connection the LINK LED will illuminate solidly.
3 OPT/LINE/MIC LEDs:
The illuminated LED indicates which source is
currently selected on the linked transmitter.
Note: Only active when linked directly to a compatible dedicated
audio transmitter.
4 MUTE LED:
This LED will illuminate when audio output is muted.
5 CH-/CH+ Buttons:
Press these buttons to increase or decrease the
streaming channel used to receive audio from the local network.
Note: If only one channel is detected, the channel number will not change.
6 MUTE Button:
Press to toggle between muting and unmuting the
audio output.
7 VOL -/+ & AUDIO SELECT Knob: Turn this knob to increase or
decrease the audio volume level of the analogue output. Press the
knob in to sequentially switch through the available audio sources on
the linked transmitter.
Note: Input selection is only available when linked directly to a compatible
dedicated audio transmitter.