CYP IP-A750RX, Руководство по эксплуатации

Страница: 11 / 32

6
2) WebGUI Hotkey:
Once you are satisfied with the network settings,
you may use them to connect via Telnet or WebGUI. The network
information window provides a convenient link to launch the WebGUI
directly.
WebGUI Overview
All major functions of the unit, including status, streaming method,
streaming channel selection, input selection, volume/mute control,
Ethernet settings, and reset/firmware functions are controllable via
multiple tabs in the WebGUI interface allowing for reasonably intuitive
operation.
Each transmitter and receiver in the system is controlled by its own
WebGUI interface which may be accessed by opening a standard web
browser on a PC and typing in the IP address of the unit you wish to
connect to. If you do not already know the IP addresses of the units
in your system, you can discover the IP addresses by using the Device
Discovery software.
Once you have connected to a unit’s WebGUI, you will be presented with
a screen containing multiple tabs for each functionality area of the unit.
To view the contents of a tab, click on the appropriate button at the top
of the window. The individual tabs and functions will be introduced in the
following sections.
Note: A Gigabit Ethernet network switch with IGMP snooping is required
when using multicast mode. A managed switch with VLAN support is strongly
recommended.