CYP EL-42PIP, Руководство по эксплуатации

Страница: 35 / 48

35
6.7.4 Audio
This tab provides control over the audio routed to both outputs as well as
control over audio muting for both digital and analogue outputs. Audio
volume and delay control is also provided for the analogue audio output.
(1) Window Audio Routing
A single selectable audio source is sent to all available outputs (HDMI and
analogue) in both Matrix and Multiviewer modes. Click on the dropdown
to select the input to route audio from.
!
Note: In Matrix mode, changing a video source (for either output) will
automatically change the audio routing selection to use that audio
source for all outputs.
(2) Audio Mute
The audio output can be freely muted or unmuted. To mute all audio
output, click the button so that it reads “Enable”. To unmute all audio
output, click the button so that it reads “Disable”.
(3) Audio Volume
The analogue audio volume can be adjusted from 0 to 100 by moving the
slider left or right. Clicking on the plus or minus buttons will change the
volume level 1 unit at a time. The current audio volume is listed above the
volume slider.
!
Note: Only applicable with LPCM audio sources. Digital audio output is
unaffected by this control.