CYP EL-42PIP Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 48

background image

29

!

Note: Both outputs will always use the same resolution, regardless of

windowing mode. Certain functions and windowing modes are not

available when the output resolution is set to 4K@50/60Hz.

(3) Window Border

This section provides controls to add a coloured border to each window.

Click the dropdown next to the window you wish to affect and select a

border colour, or “OFF”. Selecting “OFF” will disable the border completely.

!

Note: The Window Border function is not supported when the output

resolution is set to 4K@50/60Hz.

(4) OSD Information

This section provides control over the OSD Information display for each

window. When the OSD switch is set to “ON”, each window will display

2 lines of input information including the input’s name and detected

resolution.

The position of the OSD Information is controlled by changing the “OSD

Location” setting which provides 6 possible location presets: Up Left,

Middle Left, Down Left, Up Right, Middle Right, Down Right.

!

Note: The OSD Information display is automatically disabled if the Logo

function is enabled.

(5) Logo Information

This section provides a way to upload a graphic logo to the unit and

display it on both outputs at a specified position. When the Logo switch

is set to “ON” the currently loaded logo will display on both outputs. If no

logo has been uploaded yet, a “No Image” error will be displayed.

To position the logo, type the X and Y coordinates into the spaces

provided and click on the “Save” button. The X and Y coordinates

correspond to the position of the upper left corner of the logo and cannot

exceed the horizontal (X) or vertical (Y) size of the currently selected

output resolution.

To upload a graphic logo, please click the “Choose File” button to open

the file selection window and then select the graphic logo file (8-bit

*.bmp format, 1920×1080 max resolution) located on your local PC. After

selecting the file, click the “Load...” button to upload the logo to the unit.

!

Note: The Logo function is not supported when the output resolution is

«
...
27
28
29
30
31
...
»

Содержание EL-42PIP

















































Отзывы:

Нет отзывов

Похожие инструкции для EL-42PIP

Бренд: Delta Страницы: 4

Бренд: vantiva Страницы: 58

Бренд: Kramer Страницы: 61

Бренд: Matrix Switch Corporation Страницы: 60

FLOW BOSS VFB-DSU

Бренд: VADA Страницы: 17

JTECH-4KPIP0401

Бренд: J-Tech Digital Страницы: 10

Бренд: A-Neuvideo Страницы: 15

Бренд: Phonic Страницы: 16

Бренд: Zektor Страницы: 41

Бренд: C&H Technologies Страницы: 28

IDS-105FE Series

Бренд: Perle Страницы: 2

CheetaHub Classic-2041

Бренд: Accton Technology Страницы: 7

Vertical Horizon VH-2402-L3

Бренд: Enterasys Страницы: 201

Бренд: Omron Страницы: 31

Бренд: Blagdon Страницы: 6

Бренд: WaveSplitter Страницы: 35

Бренд: Clear-Com Страницы: 21

Бренд: EMKO Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды