CYP EL-42PIP, Руководство по эксплуатации

Страница: 18 / 48

18
6.6.4 Scaler Commands
COMMAND
DESCRIPTION VARIABLES
GET WINDOW
N1
ROUTE 
Show the input currently routed to
window
N1
.
N1
= 1~4 [Window number]
SET WINDOW
N1
BORDER
N2

Set the border colour for window
N1
.
N1
= 1~4 [Window number]
Available values for N2 :
0 [Off]
1 [Blue]
2 [Green]
3 [Red]
4 [Yellow]
5 [Cyan]
6 [Magenta]
GET WINDOW N1 BORDER

Show the border colour for window N1 . N1 = 1~4 [Window number]
SET PIP HSIZE
N1

Set the horizontal size of the PiP
window (in pixels).
N1
= 0~? [PiP width]
!
Note: The maximum value depends on, and cannot exceed, the current output
resolution’s width.
GET PIP HSIZE 
Show the current horizontal PiP
window size.
SET PIP VSIZE
N1

Set the vertical size of the PiP window
(in pixels).
N1
= 0~? [PiP height]
!
Note: The maximum value depends on, and cannot exceed, the current output
resolution’s height.
GET PIP VSIZE 
Show the current vertical PiP window
size.