![CYP CPHD-V4 Скачать руководство пользователя страница 95](http://html1.mh-extra.com/html/cyp/cphd-v4/cphd-v4_operation-manual_2705073095.webp)
90
COMMAND
Description and Parameters
$edid_rx?
Show the current EDID selection for the unit’s HDMI input (Rx).
$edid_type? N1
Show the current EDID type of the selected location.
Available values for
N1
:
RX
[HDMI Input (Rx) Port]
SINK_H
[HDMI Sink]
SINK_V
[VGA Sink]
Note: If the EDID fails to be read, “$err_ddc” will be displayed. If the
EDID has invalid content, “$err_bad” will be displayed.
$edid_write N1,N2 N3
Directly write an EDID block to the selected EDID location.
Available values for
N1
:
RX
[HDMI Input (Rx) Port]
SINK_H
[HDMI Sink]
SINK_V
[VGA Sink]
N2
= BLOCK0~BLOCK1[EDID block to write to]
N3
= <CR><LF>{Data} [128 byte hex data]
Note: The data must be sent as a 128 byte hex data bit stream
following the <CR><LF> in the N3 part of the command. Each hex
data unit is composed of 3 digits. The first 2 digits are the hex value.
The 3rd digit is a space (0x20). If the sum of the 128 byte data isn’t 0,
“$err_checksum” will be displayed.
$factory
Execute a factory reset and reboot the unit.
Note: Stored Copy EDIDs and Ethernet settings will not be reset.
$fwver?
Show the current firmware version.
Содержание CPHD-V4
