CYP CPHD-V4, Руководство по эксплуатации

Страница: 36 / 120

31
4) RxSense: Enable or Disable RxSense on the HDMI input.
Note: Will return to factory default settings if the power is turned off.
5) DDC: Enable or Disable the HDMI input’s DDC bus.
Note: Will return to factory default settings if the power is turned off.
6) V.Freq/1.001 Detection: When enabled, treats close timings, such as
60Hz/59.94Hz for example, as independently distinct timings. When
disabled, 60Hz and 59.94Hz will both be detected as “60Hz”.
Note: Unstable sources with a large amount of signal jitter that are
difficult to lock onto may benefit from disabling this setting.
7) PC Clock Tolerance: Set the HDMI input’s clock detection tolerance
when receiving PC sources.
8) HDCP Port On/Off: Enable or disable HDCP support on the HDMI input.
Note: Will return to factory default settings if the power is turned off.
9) HDCP Port Version: Select the HDCP version(s) supported by the HDMI
input.
10) HDCP REAUTH_REQ Toggle:
Forces the HDMI input to restart the
HDCP authorization process.
Note: Valid for HDCP v2.2 only.
11) HDCP Counter Reset:
Reset the HDCP Input Monitor’s counter value.
Note: Valid for HDCP v1.4 or lower only.
12) SCDC Port On/Off:
Enable or Disable the HDMI input’s SCDC signal.
Note: Will return to factory default settings if the power is turned off.
13) SCDC CED Ch Auto Clear: When disabled, this setting allows the unit
to accumulate CED values while monitoring, rather than the value being
automatically cleared.