CYP CDPS-P314EDC, Руководство по эксплуатации

Страница: 37 / 68

32
to open the file selection window and then select an appropriate EDID
file (*.bin format) located on your local PC. After selecting the file, click
the “Upload” button to load the firmware into the unit.
2) Audio Setting: This section provides control over the local HDMI and
analog audio output of the unit including independent routing selection.
Pressing the “Save” button will activate the associated settings.
„
HDMI Setting:
Provides control over the unit’s HDMI output’s audio.
Free Routing: Enable or disable independent audio routing for the
HDMI output’s audio source. When free routing is disabled, audio
sources will be selected from the currently routed video stream’s
encoder.
HDMI Mute: Enable or disable muting the local HDMI output’s audio.
Hostname/IP: Type the hostname or IP address of the Encoder to
stream audio from.
Note: The hostname of an Encoder can be found on the System tab
in the Info section. Generally speaking, when receiving a stream from
outside of your local network, an IP address will be required.
Source: Select which audio input from the currently selected audio
source to output.
Note: When free routing is disabled, audio will be selected from the
local analog and HDMI inputs.
Port: Type the streaming port used by the streaming source.
„
Analog Setting: Provides control over the unit’s analog audio output.
Free Routing: Enable or disable independent audio routing for the
analog audio output’s source. When free routing is disabled, audio