CYP CDPS-P314EDC, Руководство по эксплуатации

Страница: 20 / 68

15
6.6.2 System Tab
This tab provides access to system configuration options including
device information and network configuration, firmware update, security
configuration, and account configuration.
1) Info: This section provides information and control over the unit’s
operational mode, device name, and network configuration. Options
for updating the firmware, saving/restoring the unit’s configuration, and
performing a factory reset is also provided.
„
Device Info:
Locate Device: Clicking this switch will enable or disable the unit’s
“Hello” mode. When enabled it will cause the unit’s current mode LED
to immediately begin flashing on the front of the unit to make it easy to
find.
Device Name: A custom name to identify the unit can be set here.
After changing the name, press the enter key to store the change.
Note: The default device name is the same as the hostname.
Hostname: Displays the unit’s network hostname.
Note: The hostname is based on the unit’s MAC address to avoid
potential network conflicts and cannot be changed.
S/N: Displays the unit’s serial number.
Mode: Click the button to switch the unit between Encoder and
Decoder mode. After changing modes the unit will reboot.
Video Input Timing (Encoder Mode Only): Displays the resolution of
the current HDMI video source.