CYP CDPS-P314EDC, Руководство по эксплуатации

Страница: 36 / 68

31
Display Mode: Use the dropdown to set the unit’s video output mode.
Available options are: Full Screen, Video Wall, Multiview, and Disable.
Note: Control over multiviewer mode is only available via the optional
IP Master Controller hardware.
Resolution: Use the dropdown to select the resolution to use for video
output. Selecting “Auto” will output using the current source’s native
resolution, selecting “Native” will output using the detected native
resolution of the connected display.
Note: In Auto mode, if the display can’t support the source’s original
resolution, video will be output at 720p, 1080p, or 4K, depending on
the display’s detected capability.
„
Video Setting: Provides controls over the video source, and
streaming reception configuration. Pressing the “Save” button will
activate changes made to these settings.
Rx Source: Use the dropdown to select the local HDMI input or
streaming as the video source for the decoder.
Mode: Select the broadcasting mode for the decoder to receive.
Available modes are: Unicast TCP, Unicast UDP, and Multicast.
Note: If the decoder’s Display Mode is set to video wall, the broadcast
mode will be restricted to Multicast.
Hostname/IP address: Type the hostname or IP address of the
streaming source to display.
Note: The hostname of an Encoder can be found on the System tab
in the Info section. Generally speaking, when receiving a stream from
outside of your local network, an IP address will be required.
Streaming Path:
Type the streaming path of the video stream from
the connected source to display (for example, “stream”, stream2”).
Note: If this space is left blank the unit will automatically use “stream”
as the stream path.
Port:
Type the streaming port used by the streaming source.
„
EDID Setting: This section provides the option of three standard
EDIDs, one sink sourced EDID and one customer uploaded EDID that
can be assigned to the HDMI input port.
Input EDID:
Use the dropdown to select the EDID to use with the
HDMI input. The new EDID source will be used immediately.
User EDID: To upload a new User EDID, click the “Choose File” button