CYP CDPS-P314EDC, Руководство по эксплуатации

Страница: 21 / 68

16
Video Output Timing (Decoder Mode Only): Displays the unit’s
current output resolution.
„
Network:
The unit’s IP mode may be switched between Static IP and
DHCP. In Static IP mode the IP, netmask and gateway addresses may
be manually set. When in DHCP mode, the unit will attempt to connect
to a local DHCP server and obtain IP, netmask and gateway addresses
automatically. Please press “Save” after making any changes to the IP
configuration or mode. The unit’s multicast group IP address, multicast
port, and MAC address is also displayed here.
Note: If the IP address is changed then the IP address required for
WebGUI/Telnet access will also change accordingly.
„
Config:
User Config: The user can download or upload the unit’s complete
configuration. The system configuration is stored as a *.json file. To
save the current configuration, click the “Download” button to save the
current system configuration to your local PC. To upload a previously
saved configuration, click the “Choose File” button to locate the saved
*.json file on your PC, then click the “Upload” button.
Firmware Update:
To update the unit’s firmware, click the “Choose
File” button to open the file selection window and then select the
firmware update file (*.bin format) located on your local PC. After
selecting the file, click the “Upgrade” button to begin the firmware
update process. After the upgrade is complete, the unit will reboot
automatically.
Factory Default: Press this button to return the unit to its factory
default state. After the factory reset is complete, the unit will reboot
automatically.
System Reboot: Press this button to reboot the unit.