CynkoMet N-233 Series, Инструкция по использованию и эксплуатации

Страница: 45 / 149

Cynko Met
N-233
Page 45
In addition, after combining the machine with the tractor check:

the serviceability of the electrical system and lighting system of the spreader,

the effectiveness of the brake system,
4.3.3 Preparation for operating the spreader as a transporter.
Start preparation of the spreader for work as a transporter by
dismounting the adapter along with the deflector (guards). Perform work
using a front loader with a minimum lifting capacity of 2000 kg.
Dismounting the adapter:

disconnect the adapter's drive shaft

remove the adapter's drive shaft. Secure it against falling

attach belts/slings to the handles found on the adapter's top beam
for the purpose of securing it against uncontrolled falling.

unfasten the screws joining the adapter's structure to the
spreader's walls and frame.

dismount the adapter, put it away in a safe place, and secure it
against falling.
Installation of rear wall:

place the rear wall on the pins of the frame. Secure against sliding
out using a pin. (Item 1, Fig. 14)

Close the rear wall. Secure against opening by means of side
latches. (Item 2, Fig. 14)