CynkoMet N-233 Series, Инструкция по использованию и эксплуатации

Страница: 23 / 149

Cynko Met
N-233
Page 23
Figure 3. The way of placing the chocks.

Before driving, check that the pins securing the drum guard are in
place. Make sure that all the walls and guards and their fastenings are
not damaged mechanically and if that malfunction could cause
detachment of the particular item from the construction of the spreader.
CAUTION!
CAUTION!
Driving on roads with the spreader is only permitted
when the spreader’s drums are shielded by their guard.

Prior to each spreader's use, check its technical condition, especially in
terms of safety. In particular, check the technical condition of the
coupling system, drive system, brakes and signaling lights and
hydraulic, pneumatic and electrical connection elements.

Before driving, check whether the parking brake is released and the
braking force regulator (included with double-circuit pneumatic brake
system) is set in the proper position (fig. 8, section 4.2.3). The spreader
is adapted for drivin
g on slopes up to a maximum inclination of 8°.
Moving the spreader on steeper slopes may cause the spreader to tip
over as a result of loss of stability.

Each time after finishing work, empty water from the air tank by means
of the drain valve (section 6.3). During frosts, freezing water may cause
damage to components of the pneumatic brake system.

It is prohibited to exceed the admissible spreader load. Exceeding the
carrying capacity may lead to equipment damage, loss of stability while
2
1