CynkoMet N-233 Series, Инструкция по использованию и эксплуатации

Страница: 70 / 149

Cynko Met
N-233
Page 70
elements cooperating directly with the spread material and used to
guard the adapter's drums (guards / deflectors, levers).
Each time before starting work with the spreader, it is essential to
check the condition of blades and spreading strips. If the case of
noticing damage to the blade in the form of cracking or deformation that
can cause damage to associated components such as: guard /
deflector, inner wall, cooperating drum, the damaged part must be
replaced immediately.
CAUTION!
CAUTION!
It is essential, before every use of the spreader, to check
the tightness of screws. Failure to perform this activity may
lead to severe damage to the machine or injury to persons
found in the proximity of the running machine.
CAUTION!
CAUTION!
Absolutely use the original drums and blades. Failure to do
so rules out the manufacturer's liability with regard to the
warranty and to the safety of the machine’s use.
6.8 Operation of the floor conveyor
Works related to conveyor maintenance are based on:

checking the front and rear socket wheels for cracks, visible
damage and hazardous pollution,

checking the condition of the chain, support points and bearings
of conveyor parts, and whether there is visible damage,

checking whether “scrapers” for self-cleaning of socket wheels are
positioned centrally in the channel of a socket wheel and have no
visible damage or wear.

checking the condition and proper tension of the chain.
This check is based on raising the chain at the center of its length
from the top upwards (on an area of floor), and determining the height
of raising:
- if this height exceeds 100 mm and the tensioner is able to slide,
adjust the chain’s tension by fastening the nut on the tensioner.
- if the height of 100 mm is exceeded and there is no space for