CynkoMet N-233 Series, Инструкция по использованию и эксплуатации

Страница: 43 / 149

Cynko Met
N-233
Page 43
If during the test drive/start-up, you experience disturbing
symptoms such as:

noise and unnatural noises coming from the rubbing of moving parts on
the construction of the spreader,

leakage of hydraulic oil,

pressure drop in the brake system,

incorrect operation of hydraulic and / or pneumatic actuators
stop the spreader's operation immediately and remove the cause
of these symptoms.
If a fault cannot be removed or removing it will invalidate the
warranty, please contact your dealer to resolve the problem.
CAUTION!
CAUTION!
Make sure that the jointed-telescopic shaft meets the
following specifications:

Nominal torque: min. 400 Nm;

Nominal revolutions 540 rpm;

Distance between joint axes:
o
In collapsed state, no more than 510 mm;
o
In extended state, no less than 785 mm;

Certified with “CE” mark;
CAUTION!
CAUTION!
It is strictly prohibited for the operator to leave the
tractor’s cabin when:
- the engine is running
- the key is in the ignition switch.
CAUTION!
CAUTION!
It is recommended that the test start-up is performed by 2
persons, and the operator of the tractor must always keep
the other person in their field of vision.