cymatic audio Live Player LP-16, Руководство пользователя

Страница: 30 / 33

UPDATING THE FIRMWARE ON YOUR LP-16 30
User Manual
LP-16
October 2015
15.3. Using the LP-16 as an Audio Interface with OS X
15.3.1. Minimum System Requirements
Operating Systems:

Mac OS X® 10.8
Hardware:

Any Mac hardware compatible with OS X 10.7 or higher

512 MB Ram (1GB or more recommended)

1 free USB 2.0 compatible port
! NOTE: The speed of your processor, amount of RAM, and capacity, size, and speed of your hard drives will
greatly affect the overall performance of your recording system.
A faster processor and more RAM can reduce signal latency (delay) and improve overall performance.
15.3.2. Driver Installation
There is no driver installation for OS X Computers necessary. Simply connect the LP-16 to your Mac® by
connecting the supplied USB cable to the LP-16 USB2.0 connector on the rear panel, and an available USB2.0
port on your Mac.
The device will now be selectable in the “Audio MIDI Setup” application, which can be found in the
Applications/Utilities folder.
Note that no custom LP-16 mixer control panel is available for the Mac, as there is when using the LP-16 with
Windows. The internal DSP mixer of the LP-16 is not available when connected to a Mac, so all monitoring must be
done through the DAW software.
15.4. Using the LP-16 as an Audio Interface with an Apple® iPad®
15.4.1. Minimum System requirements
Operating Systems:

iOS® 5 or higher
Hardware:

iPad® 2 or newer

Apple® iPad Camera Connection Kit

Apple Lightning to USB Camera Adapter
15.4.2. Driver Installation
There is no driver installation for the iPad® necessary. Simply connect the LP-16 to your iPad® by connecting the
supplied USB cable to the LP-16 USB2.0 connector on the rear panel and the iPad® using the appropriate Apple
USB adapter.
The LP-16 can now be used as a 2-input, 18-output audio interface with the iPad® and appropriate iOS recording
software.
16. UPDATING THE FIRMWARE ON YOUR LP-16
Please check the Cymatic Audio website (www.cymaticaudio.com) for any available firmware updates.
The LP-
16’s currently installed firmware version is shown briefly on the start screen when the unit is powering up
and can also b
e found in the PC Mixer Panels ‘About’ tab
If you find that your firmware version number is lower than the latest firmware released on the website, please
download and install the newer firmware, following the instructions that accompany the firmware download file.