CYKLOP GL 200 Скачать руководство пользователя страница 33

Страница: 33 / 92

6. Troubleshooting

Problem

Action

If nothing works?

Check that the machine is powered up and that the switch is set to position "1". Try
holding down "Machine stop" for 3 s.

Then "reset" the machine. Run to starting position.

Check that the emergency stop is not depressed. If it is, turn the button to the right:
it should then pop out.

If the lm breaks?

Correct the lm and reattach the lm to the pallet (not during operation), then press
"Start".

If the rotary board stops in the wrong
position?

Press Reset.

If the lm is not applied right up to the
top of the goods?

Check the goods height sensor (see "Adjustment of height photoelectric cell" on page
38). Check the lm application settings: read "Display - Pallet parameters" (password
required).

Elevator does not go down

The obstruction protection under the elevator may be activated. Check that there is
nothing under the elevator.

The board has jammed

Check the board pulse sensor (under a cover by the mast).

Содержание GL 200





























































































Результаты поиска

Содержание GL 200

Отзывы:

Похожие инструкции для GL 200

Бренды по названию

Популярные бренды

CYKLOP GL 200, Руководство пользователя

Результаты поиска

Содержание GL 200

Отзывы:

Похожие инструкции для GL 200

Бренды по названию

Популярные бренды